Photo Album: Foundation Stabilization in Port Charlotte, FL

Michael and Crystal O. were growing concerned as they started experiencing several cracks in the exterior of their Port Charlotte, Florida home. They wanted peace of mind their home was structurally sound so they called LRE Foundation Repair for help. LRE conducted a full home inspection and determined that poor grading and erosion were the main causes of this home's settlement issues. LRE designed a solution that included the installation of helical piers as well as the injection of PolyLevel to the side of the home. These two systems are often used in conjunction to remedy foundation settlement. First, galvanized steel helical piers are drilled into the soil and attached to the home's footer with brackets that are custom-fit. These piers compact the soils below and add stability to the structure. Next, PolyLevel, an expandable foam material, is injected in small points around the home, filling voids and solidifying soils even more. Once the project was complete and the site was cleaned up, these homeowners were finally stress-free knowing their home is permanently stabilized.

Stairstep Cracks to Exterior Walls

These stairstep cracks were growing in size and number prompting these homeowners to call LRE for help.

Erosion Leaves Footer Exposed

Poor grading and erosion of soils over time can leave a home's footer exposed. In addition, it can compromise the foundation causing it to move and crack.

Cracks Around Windows

Another common symptom of foundation settlement or sinking are cracks that form around windows. This is a problem because if left untreated, could lead to water intrusion.

Holes for Helical Piers

Helical piers are carefully measured and installed around sections of the house that experience movement. Holes are created first and close to the foundation.

Helical Pier Installed

The first helical pier is drilled into the soil and bracket attached to the top.

Helical Pier and Bracket Installation

Each helical pier and bracket are custom-cut for a perfect fit to the home's footer. The pier is cut to size and once complete both items are covered over and buried underground.

PolyLevel Application to Side of House

The next step in this stabilization project is injecting PolyLevel around the perimeter of the affected area.

PolyLevel Injection and Curing

PolyLevel fills voids in soil and adds to the stability of the home. This product also cures in less than 30 minutes, is environmentally safe, and a permanent solution for repairing a home.