Photo Album: Filling Holes Around Pool in Spring Hill, FL

Jimmy J. and his wife noticed holes appearing around their pool in Spring Hill, Florida. They were worried that there might be additional issues beneath their paver pool deck. As a result, they called for assistance from LRE Foundation Repair. LRE conducted an inspection and found additional voids due to washed-out soil and erosion. To stabilize the pool deck, we developed a solution using PolyLevel, which is an injectable, expanding foam material. PolyLevel was injected at various spots around the pool after carefully removing some of the pavers. Once the job was done, the pavers were replaced. Additionally, PolyLevel was applied to the outside of the enclosure to ensure that all voids were filled and soils stabilized. After the site was cleaned up, the homeowners could breathe a sigh of relief knowing that their pool problems had been permanently resolved.

Voids Under Paver Deck

Voids were found beneath the pavers on this pool deck, an indication of shifting and washed out soils conditions.

Pavers Carefully Removed

Additional pavers were removed to allow LRE's team to apply the PolyLevel product into the ground below.

PolyLevel Injection Sites

PolyLevel, an expanding polyurethane foam material, is injected through very small metal tubes placed into the ground around the pool deck.

Injection Points Drilled

Small holes are drilled underneath the paver deck to allow for the expanding foam material, called PolyLevel, to be injected.

Expanding Foam Fills Voids

The material that is injected in each point expands quickly to fill all voids and stabilize the soils.

PolyLevel Injection Around Pool

PolyLevel can be injected into the pool deck or outside in the yard around the deck. The material flows easily from the injection site through loose soils.