Concrete Leveling Before & After Photos

Gregory's concrete driveway in Hernando, Florida, required repairs as the slabs had become uneven, creating a significant trip hazard. Concerned about potential injuries, he asked LRE Foundation Repair for help. An expert Design Specialist discovered that weak soil underneath the driveway had caused the concrete to sink, resulting in an uneven surface. The LRE team successfully raised the sunken slab back to an even level using the PolyLevel solution, which also ensured permanent stabilization of the soil below. With the trip hazard now eliminated, Gregory can now put his injury concerns to rest.

Joseph from The Villages, Florida was concerned about his sinking concrete driveway and reached out to LRE Foundation Repair for help. After consulting with an LRE Design Specialist, Joseph was assured that his concrete did not need to be replaced but rather needed protection. The LRE team then implemented the Three-Part Concrete Protection System to restore and protect the driveway. The first step was to inject PolyLevel under the concrete to lift, level, and stabilize the sinking portions of the driveway permanently. Next, Sealant Pro was applied to the concrete to protect against harmful UV rays, moisture penetration, cracking, and discoloration. Finally, the joints and cracks were sealed with the NexusPro solution to prevent water from intruding below the concrete and keep debris out. Joseph was thrilled to see that his driveway had been completely restored, featuring an even, safe level and enhanced protection against wear and tear.

A section of Patricia's concrete driveway at her home in The Villages, Florida, had developed a major tripping hazard as the slabs had become uneven. In need of a reliable solution, Patricia called us at LRE Foundation Repair and scheduled a free appointment with one of our Design Specialists. Following a thorough inspection, our specialist devised a plan to level the concrete slabs with PolyLevel. Our team injected the PolyLevel solution directly underneath the slabs, and within minutes, the concrete driveway was back to its proper, even level. Now, Patricia can feel relieved knowing that the tripping hazard has been completely removed and her concrete driveway is permanently stabilized.

Patricia from The Villages, Florida, contacted LRE Foundation Repair to inspect her concrete driveway after a serious tripping hazard emerged on the surface. Following a thorough inspection by one of our expert Design Specialists, it was determined that soil settlement had taken place beneath the driveway, causing the concrete slabs to sink and become uneven. Our production team soon stepped in and leveled the uneven slabs by injecting PolyLevel directly beneath the driveway. The trip hazard has now been completely eliminated, and Patricia's concrete driveway is now restored to an even, safe level.

Paul's concrete driveway at his home in Umatilla, Florida, had become severely uneven after one of the slabs sank significantly into the ground, creating a major trip hazard near the entrance to his garage. He called us at LRE Foundation Repair and one of our expert Design Specialists visited his home to carefully inspect the driveway. Upon assessing the concrete, it was found that a substantial amount of the underlying soil had washed away, creating a lack of stability for the driveway and causing the slabs to become unlevel. A plan was created to implement our Two-Part Concrete Protection System to fully lift, level, and stabilize the concrete. First, our team injected PolyLevel directly beneath the driveway to level the concrete and stabilize the surrounding soil. Next, the joints between the slabs were filled with NexusPro to prevent water from seeping below the driveway and causing further soil erosion. Now, Paul's driveway is fully leveled and supported, offering long-term stability and peace of mind.