Concrete Repair Before & After Photos

John and Patricia M. have been living in their Beverly Hills, Florida home for several years. Recently, John retired and started noticing tripping hazards around his pool deck. He was concerned that either he or his wife might get injured on the uneven concrete, so he contacted LRE Foundation Repair for a solution. LRE conducted a thorough inspection of the entire home and concluded that age and erosion were the main causes of the shifting deck. They recommended a solution using PolyLevel, which is an expanding polymer foam material. The PolyLevel is injected straight through the concrete deck and flows into the soils beneath it. As the material flows, it expands to fill voids and compact loose soils, lifting areas of the deck back to a level state, achieving exactly what the homeowners were hoping for. Once the job was finished, John and Patricia could rest easy, knowing that their tripping hazards were eliminated and their pool deck was permanently stabilized.

The concrete of Gary's driveway in Beverly Hills, Florida, had developed a significant tripping hazard, raising considerable concerns for him and his wife. They asked LRE Foundation Repair to inspect the driveway to see if anything could be done to fix the issue. An LRE Design Specialist visited their home and immediately noticed the unevenness of the concrete, with one slab significantly settling lower than the other. The LRE team administered the use of PolyLevel to lift and level the settling concrete, bringing the surface to an even, uniform level. Gary and his wife were thrilled to see the tripping hazard eliminated, relieving them of this persistent threat of injury.

Susan in Beverly Hills, Florida, faced a troubling issue with her concrete driveway when small voids had formed in the soil underneath. She reached out to us for assistance with stabilizing the driveway so that she could feel safe walking on it again. Our team went to work filling the voids and leveling the concrete using our PolyLevel solution. Once the slabs were stabilized, NexusPro was used to seal the joints and cracks in the concrete to protect against water intrusion underneath the slabs. The result not only fully addressed Susan's stabilization concerns, but also greatly enhanced her driveway’s curb appeal.

In Beverly Hills, Florida, Faye contacted LRE Foundation Repair for help with her concrete driveway. She had noticed cracks forming in several areas, and previous repair work had left mismatched color tones throughout the concrete. Following a thorough inspection by our expert Design Specialist, a plan was created to implement our Three-Part Concrete Protection System to repair and enhance Faye’s driveway. First, our team injected PolyLevel beneath the driveway to lift, level, and stabilize the slabs. Next, we sealed the joints and cracks with NexusPro to protect against water intrusion. Finally, DecoShield was applied to the surface to prevent chipping, flaking, and staining, while also adding a light gray translucent tint for an even color tone throughout. Now Faye’s concrete driveway has been fully transformed with long-term protection and enhanced curb appeal.

Bill B. from Beverly Hills, Florida reached out to LRE Foundation Repair, seeking a solution to rejuvenate his old driveway. The driveway had multiple stains and cracks, and Bill was hoping that LRE could fix them. Upon inspection, LRE discovered that the expansion joints had rotting wood fillings, which had caused damage and allowed moisture and mildew to accumulate. To address the issue, LRE removed the wood fillings and prepared the cracks and joints for sealing with NexusPro, a flexible, silicone-based crack filler that is perfect for such projects. After filling all the cracks and joints, LRE color-matched the concrete with a tinted concrete sealer called DecoShield and applied it over the driveway. The result was a beautiful driveway that not only looked brand new but was also well-protected for years to come. Bill was thrilled with the outcome.